Quality Marine Products Distributor

Presents
Quality Monitoring Instruments Ltd

Contact Jastram  Line Card  Product Index  External Links  

Triplex System for Monitoring Oil Mist
 

Oil Mist Detection and Alarm system

QMI Triplex Monitor and Alarm Unit can monitor up to 3 individual input points. Can be mounted in the control room or on the bridge. Facility for output to data/event logging system
More Information below

Atmospheric Detector
Atmospheric Detector - for Engine Room, Purifier Room, Steering Gear,  Hydraulic Pump & Bowthruster Space monitoring
More Information below


Description of QMI TriplexTM  System

The new QMI TRIPLEX™ monitoring system is the practical answer to meet the need for oil mist monitoring in areas where only one, two or three detectors are required.

QMI atmospheric oil mist systems identify a hazardous build-up of oil mist in confined zones.

The oil mist concentration in the atmosphere is instantly reported back to the monitor to give advance warning of dangerous conditions in order to prevent the outbreak of fires.

The detectors incorporate a small fan to ensure a positive stream of air through the sensing system and are sited in the airflow usually over the equipment being monitored..
 

Suggested applications are:
Hydraulic pack locations as recommended by OCIMF SIRE Programme Ships Inspection Report 11.25

  • Purifier rooms
  • Bow thrusters
  • Steering gear.
  • Shaft bearing tunnels
  • Generator rooms
  • Main engine rooms as recommended by IMO 1086
  • Test cells & chambers.
  • Hydraulic chambers

The QMI TRIPLEX system is simple to install on
new or existing vessels with the following advantages:

  • Fast response

  • No false alarms

  • Easy to read

  • No scanning


All detectors are calibrated and interchangeable
User friendly working instructions on the face plate of the QMI TRIPLEX™
Detectors can be located more than 100 meters from the QMI TRIPLEX™
Minimal maintenance
Avoids major clean up operations
 

Specification of QMI TriplexTM  System

Monitor Dimensions: 280 x 230 x 138 mm
Weight: 5.20 kg
Sampling Point: Maximum 3 alarms
Switches: 2 Functional Switch: 1
Monitor Case: IP65
Manual test program except for functional facility
Response Time of Detection: 0.05 seconds
Voltage: 110/240VAC
Maximum power consumption: 100W
Self-diagnostic alarm for the monitoring system

Optional extra:
Triplex unboxed 3-way PCB 13.5 x 10cms to simply installation
 


The  Detector

The Atmospheric Detector uses the same technology as the crankcase detector but has its own internal fan  for drawing sample air from the space being monitored into the photoelectric chamber of the monitor. It is connected to the Monitor in the same manner as the Crankcase Detector.

 

Specification of QMI Atmospheric Detector

Detector Dimensions: 359 x 113 x 73 mm (including mounting)
Weight: 2.30 Kg
Detector Case: IP65 except fan. 12v fan, power taken from the monitor
Mounting: Flanged Articulated Joint

 


Contact Jastram  Line Card Product Index External Links

Jastram Logo and page style © Jastram Technologies Ltd.
QMI Logo, graphics and text © Quality Monitoring Instuments Ltd
 new 9th January 2007