Quality Marine
Products Distributor

Presents

Navigation Aids

FH800(3)  Fog horn

for use on offshore platforms, jetties, piers and buoys.
          range  main  horn                    2 nm
          range secondary horn              0.5 nm
          sound pattern                           360°
         sound pressure                          approx 134 db @ 1 m
          frequency                                 845 Hz
          diaphragm                               stainless steel
          body                                        316 stainless steel
          emitters                                   3
          protection                               IP67 design
Available fully certified for use in zone 1 hazardous areas.
Ex certificate (KEMA 93.y.8089), USCG approval, Trinity House approval for 2nm range, DGSM approval for offshore installations

VF500 Visibility Sensor

Infrared forward scatter visibility sensor, automatic on-off control of foghorns, visibility measurements.
       operating voltage            230vac or 24vdc
                                                  (120vac 12 vdc optional)
       power consumption         4w instrument  6w no dew heaters
       accuracy                          5%
       output                             changeover contact 0 - 10 v signal
       light source                     infrared
       range                              3m - 30km or 30M - 300 km
       operating principle         forward scatter
       certificates                      also available for use in Zone 2
                                             ATEX compliant, type VDX04FM

 FML155FM Marine Lantern, Zone 2

Heavy duty 5 nm range marine lantern for buoys, jetties, and offshore platforms in accordance with USCG and IALA requirements.
      light intensity             up to 1000 CD depending on
                                        lens and flash character
      light character            preset, programmable with
                                        programmer or dip switches
      lens, acrylic                155 mm
      lens colour                 clear, red, green, yellow
      lamp                          12vdc 6 x 1000 burning hours
                                        depending of rang up to 100w
      lamp changer            Type ALC6-SA with 6 lamp
                                        positions, dual filament optional
      sunswitch                   photocell for daylight control
      operating voltage      12vdc (8-16vdc) others on request
      protection                  IP67 design
      bird spike                   part of acrylic lens design

 FML155SA Marine Lantern

Heavy duty 5 nm range marine lantern for buoys, jetties, and offshore platforms in accordance with USCG and IALA requirements.
      light intensity             up to 1000 CD depending on
                                        lens and flash character
      light character            preset, programmable with
                                        programmer or dip switches
      lens, acrylic                155 mm
      lens colour                 clear, red, green, yellow
      lamp                          12vdc 6 x 1000 burning hours
                                        depending of rang up to 100w
      lamp changer            Type ALC6-SA with 6 lamp
                                        positions, dual filament optional
      sunswitch                   photocell for daylight control
      operating voltage      12vdc (8-16vdc) others on request
      protection                  IP67 design
      bird spike                   part of acrylic lens design

FML301EX / L303EX-M
Combined Main / Secondary Marine Lantern
Zone 1

15 and 10 nautical mile combined main / secondary marine lantern in compliance with IALA requirements, for offshore platforms, tanker jetties and mooring buoys
      main light intensity          16,500 CD Clear fixed
      light character                  Morse Code U every 15 sec
      lens tempered glass          300 mm
      lamp                                 750w 120vac
      lens, polycarbonate          250 mm
      lamp life                          approx 3000 operating hours
      operating voltage             120vac, coded supply from
                                              dedicated control panel
      protection                        IP67 design
      certificates                       EX certified for Zone 1 and 2
                                              Trinity House, DGSM

L303EX-M Marine Lantern, Zone 1

10 nautical mile marine lantern in compliance with IALA and USCG requirements for use on offshore platforms, tanker jetties and mooring buoys.
      light intensity                  2125cd, depending on lens
                                             colour and flash characteristics
      light character                preset, programmable or
                                            determined by Navaid Central
                                            control panel
     lens diameter                  300mm
     lens colours                     clear, red, green yellow
     lamp                               12v S8 or S11 navaid lamp
                                            with EEx-d socket
     life expectancy               1000 burning hours each lamp
     lampchanger                  6 place lampchanger,
                                           EEx-dem certified
    sunswitch                         provided
    operating voltage            12 or 24 vdc, 230vac (when
                                           powered from Navaid Central
                                           control panel)
    protection                        IP67 design
    certificates                       Ex certificate for Zone 1
                                            USCG

L303FM-M Marine Lantern, Zone 2

10 nautical mile marine lantern in compliance with IALA and USCG requirements for use on offshore platforms, tanker jetties and mooring buoys.
      light intensity                  2125cd, depending on lens
                                             colour and flash characteristics
      light character                preset, programmable with
                                            programmer or by dipswitches
     lens diameter                  300mm
     lens colours                     clear, red, green yellow
     lamp                               6 x 12vdc 
                                           depending on range up to 60w
     life expectancy               6x 1000 burning hrs ea. lamp
     lampchanger                  6 place lampchanger,
                                           control from flasher auto
                                           rotation stop after last lamp
    sunswitch                         provided for daylight control
    operating voltage            12 or 24 vdc,
    protection                        IP67 design
    certificates                       Ex certificate for Zone 2
                                            USCG

L303SA-M Marine Lantern

10 nautical mile marine lantern in compliance with IALA and USCG requirements for use on offshore platforms, windfarms, tanker jetties, buoys, ports and harbours.
      light intensity                 see data sheet
      light character                preset, programmable with
                                            programmer or by dipswitches
     lens diameter                  300mm
     lens colours                     clear, red, green yellow
     lamp                               6 x 12vdc 
                                           depending on range to 100w
     life expectancy               6x 1000 burning hrs incand.
                                            6x 2000 burning hrs halogen
     lampchanger                  6Typw ALC6-SA with 6 lamp
                                           positions, Dual filament opt.
    sunswitch                         provided for daylight control
    operating voltage            12 or 24 vdc, 230vac (when
                                           powered from control panel)
    protection                        IP67 design
    certificates                       IALA & USCG compliant

Dual Filament Lamp and Flasher

for use with Orga range and marine lanterns. Low cost alternative to the automatic lampchanger. Automatic change over from faulty to healthy lamp filament

ALC Automatic Lampchanger
with 6 reserve lamps

for use with Orga range and marine lanterns.
          lamp position accuracy              0..08 mm
          input voltage                             8/14 Vdc or ac
          load max.                                  5 amp
Available fully certified for use in zone 1 hazardous areas.

Orga Navigation Aid
Central Control Panels

available for use on jetties and offshore installations, provides control and monitoring or all system navigation aids. The lanterns and fog signals are fed by a coded AC supply obtained from centrally mounted inverters. The AC distribution to the remotely mounted navigation aids prevents voltage drop and synchronization problems and optimizes cable sizing. Enunciator and alarm contacts indicate partial or complete failure.

Orga Battery Boxes
& BEX450 Primary Battery
for zone 1 & 2 hazardous area

are available in stainless steel, GRP and carbon steel. Our EEx-e stainless steel battery boxes are used on many offshore platforms and buoys located in potentially explosive environments, including NiCad or sealed Lead Acid batteries.

BEX450 was specially developed primary battery for use in zone 1 and 2 hazardous areas (offshore platforms, jetties, loading buoys, etc.) The voltage is 12 or 18 volts and the capacity is 450Ah