Recessed Fluorescent Luminaires
with or without battery back-up for
parallel mounting in linear interlocking ceiling systems
Application: Interior recessed parallel mounting in linear interlocking ceiling systems (Dampa, Dana Acoustic, BIP etc.)
Approvals: CSA C22.2 No. 250.0-00, UL 1598 & 1598A
Protection Class: IP20
Housing: Aluzinc sheet steel
Finish: Epoxy powder coat, white RAL 9016
Diffuser: Aluminum extruded frame with a selection of different acrylic diffuser materials; FR1: double prismatic; FR2: Acrylic Opal Panel; FR3: White acrylic grid; FR4:
Matallised acrylic grid in silver
Electrical: Flexible wiring, heat resistant to 105°C, through wiring up to 15A
Cable Entry: one knock-out at each end and back
Lamp Base: G13
Light Sources
(not included):
Fluorescent Tube, T8, 17/32w tubes for electronic ballasts;
T12, 20/40w tubes for magnetic ballasts
Battery backup: Optional 90-minute battery backup. 500-600 lumens for 90 minutes at 20°C. Other configurations available on request.
Charge time from full discharge: 24 hours
Supply voltage: 120v 60hz h.p.f.c. for magnetic ballasts, 120-277vac 50/60hz for electronic ballasts
Mounting: mounting kit provided for recessed parallel mounting in linear, interlocking ceiling. Mounting kit provided
Versions available: 2 x 17/20w or 2 x 32/40w, with
or without battery backup with either magnetic or electronic ballasts. Optional dimming ballast available on request.
Dimming: Optional dimming ballast available upon request.
Part Number: MT-DLT-1xxx
(DLT RS (M) FR) |
Click on any image to see a larger version of the
picture
and then use the "Back" button in your browser to return to this page
 |
|
Recessed Fluorescent Luminaires
with or without battery back-up for
transverse mounting in linear interlocking ceiling systems
Application: Interior recessed transverse mounting in linear interlocking ceiling systems (Dampa, Dana Acoustic, BIP etc.)
Approvals: CSA C22.2 No. 250.0-00, UL 1598 & 1598A
Protection Class: IP20
Housing: Aluzinc sheet steel
Finish: Epoxy powder coat, white RAL 9016
Diffuser: Aluminum extruded frame with a selection of different acrylic diffuser materials; FR1: double prismatic; FR2: Acrylic Opal Panel; FR3: White acrylic grid; FR4:
Matallised acrylic grid in silver
Electrical: Flexible wiring, heat resistant to 105°C, through wiring up to 15A
Cable Entry: one knock-out at each end and back
Lamp Base: G13
Light Sources
(not included):
Fluorescent Tube, T8, 17/32w tubes for electronic ballasts;
T12, 20/40w tubes for magnetic ballasts
Battery backup: Optional 90-minute battery backup. 500-600 lumens for 90 minutes at 20°C. Other configurations available on request.
Charge time from full discharge: 24 hours
Supply voltage: 120v 60hz h.p.f.c. for magnetic ballasts, 120-277vac 50/60hz for electronic ballasts
Mounting: mounting kit provided for recessed parallel mounting in linear, interlocking ceiling. Mounting kit provided
Versions available: 2 x 17/20w or 2 x 32/40w, with
or without battery backup with either magnetic or electronic ballasts.
Dimming: Optional dimming ballast available upon request.
Part Number: MT-DLT-3xxx
(DLT RT (M) FR) |
Click on any image to see a larger version of the
picture
and then use the "Back" button in your browser to return to this page
|
|
Recessed Fluorescent Luminaires
with or without battery back-up for
parallel mounting in linear interlocking ceiling systems
Application: Interior recessed parallel mounting in linear interlocking ceiling systems (Dampa, Dana Acoustic, BIP etc.)
Approvals: CSA C22.2 No. 250.0-00, UL 1598 & 1598A
Protection Class: IP20
Housing: Aluzinc sheet steel
Finish: Epoxy powder coat, white RAL 9016
Diffuser: Available with either a Batwing (BW) or Darklight (DL) aluminum louver with clear acrylic finish.
Electrical: Flexible wiring, heat resistant to 105°C, through wiring up to 15A
Cable Entry: one knock-out at each end and back
Lamp Base: G13
Light Sources
(not included): Fluorescent Tube, T8, 17/32w tubes for electronic ballasts;
T12, 20/40w tubes for magnetic ballasts
Battery backup: Optional 90-minute battery backup. 500-600 lumens for 90 minutes at 20°C. Other configurations available on request.
Charge time from full discharge: 24 hours
Supply voltage: 120v 60hz h.p.f.c. for magnetic ballasts, 120-277vac 50/60hz for electronic ballasts
Mounting: mounting kit provided for recessed parallel mounting in linear, interlocking ceiling. Mounting kit provided
Versions available: 2 x 17/20w or 2 x 32/40w, with
or without battery backup with either magnetic or electronic ballasts.
Dimming: Optional dimming ballast available upon request.
Part Number: MT-DLT-1xxx
(DLT RS (M) BW/DL) |
Click on any image to see a larger version of the
picture
and then use the "Back" button in your browser to return to this page
 |
|
Recessed Fluorescent Luminaires
with or without battery back-up for
transverse mounting in linear interlocking ceiling systems
Application: Interior recessed transverse mounting in linear interlocking ceiling systems (Dampa, Dana Acoustic, BIP etc.)
Approvals: CSA C22.2 No. 250.0-00, UL 1598 & 1598A
Protection Class: IP20
Housing: Aluzinc sheet steel
Finish: Epoxy powder coat, white RAL 9016
Diffuser: Aluminum extruded frame with a selection of different acrylic diffuser materials; FR1: double prismatic; FR2: Acrylic Opal Panel; FR3: White acrylic grid; FR4:
Matallised acrylic grid in silver
Electrical: Flexible wiring, heat resistant to 105°C, through wiring up to 15A
Cable Entry: one knock-out at each end and back
Lamp Base: G13
Light Sources
(not included):
Fluorescent Tube, T8, 17/32w tubes for electronic ballasts;
T12, 20/40w tubes for magnetic ballasts
Battery backup: Optional 90-minute battery backup. 500-600 lumens for 90 minutes at 20°C. Other configurations available on request.
Charge time from full discharge: 24 hours
Supply voltage: 120v 60hz h.p.f.c. for magnetic ballasts, 120-277vac 50/60hz for electronic ballasts
Mounting: mounting kit provided for recessed parallel mounting in linear, interlocking ceiling. Mounting kit provided
Versions available: 2 x 17/20w or 2 x 32/40w, with
or without battery backup with either magnetic or electronic ballasts.
Dimming: Optional dimming ballast available upon request.
Part Number: MT-DLT-3xxx
(DLT RT (M) BW/DL) |
Click on any image to see a larger version of the
picture
and then use the "Back" button in your browser to return to this page
 |
|
Recessed Fluorescent Luminaires
with or without battery back-up for
parallel mounting in linear interlocking ceiling system
Application: Interior recessed parallel mounting in linear interlocking ceiling systems (Jamestown Marine C70)
Approvals: CSA C22.2 No. 250.0-00, UL 1598 & 1598A
Protection Class: IP23
Housing: Aluzinc sheet steel
Finish: Epoxy powder coat, white RAL 9016
Diffuser: Aluminum extruded frame with a selection of different acrylic diffuser materials; FR1: double prismatic; FR2: Acrylic Opal Panel; FR3: White acrylic grid; FR4:
Matallised acrylic grid in silver
Electrical: Flexible wiring, heat resistant to 105°C, through wiring up to 15A
Cable Entry: one knock-out at each end and back
Lamp Base: G13
Light Sources
(not included):
Fluorescent Tube, T8, 17/32w tubes for electronic ballasts;
T12, 20/40w tubes for magnetic ballasts
Battery backup: Optional 90-minute battery backup. 500-600 lumens for 90 minutes at 20°C. Other configurations available on request.
Charge time from full discharge: 24 hours
Supply voltage: 120v 60hz h.p.f.c. for magnetic ballasts, 120-277vac 50/60hz for electronic ballasts
Mounting: mounting kit provided for recessed parallel mounting in linear, Jamestown Marine C70 interlocking ceiling, fixed mounting hardware .
Versions available: 2 x
17/20w or 2 x 32/40w, with or without battery backup with either magnetic or electronic ballasts.
Dimming: Optional dimming ballast available upon request.
Part Number: MT-DLT-6xxx
(DLT RS (JM) FR) |
Click on any image to see a larger version of the
picture
and then use the "Back" button in your browser to return to this page
|
|
Recessed Fluorescent Luminaires
with or without battery back-up for
transverse mounting in linear interlocking ceiling system
Application: Interior recessed transverse mounting in linear interlocking ceiling systems (Jamestown Marine C70)
Approvals: CSA C22.2 No. 250.0-00, UL 1598 & 1598A
Protection Class: IP23
Housing: Aluzinc sheet steel
Finish: Epoxy powder coat, white RAL 9016
Diffuser: Aluminum extruded frame with a selection of different acrylic diffuser materials; FR1: double prismatic; FR2: Acrylic Opal Panel; FR3: White acrylic grid; FR4:
Matallised acrylic grid in silver
Electrical: Flexible wiring, heat resistant to 105°C, through wiring up to 15A
Cable Entry: one knock-out at each end and back
Lamp Base: G13
Light Sources
(not included):
Fluorescent Tube, T8, 17/32w tubes for electronic ballasts;
T12, 20/40w tubes for magnetic ballasts
Battery backup: Optional 90-minute battery backup. 500-600 lumens for 90 minutes at 20°C. Other configurations available on request.
Charge time from full discharge: 24 hours
Supply voltage: 120v 60hz h.p.f.c. for magnetic ballasts, 120-277vac 50/60hz for electronic ballasts
Mounting: mounting kit provided for recessed parallel mounting in linear, Jamestown Marine C70 interlocking ceiling, fixed mounting hardware.
Versions available: 2 x
17/20w or 2 x 32/40w, with or without battery backup with either magnetic or electronic ballasts.
Dimming: Optional dimming ballast available upon request.
Part Number: MT-DLT-6xxx
(DLT RT (JM) FR) |
Click on any image to see a larger version of the
picture
and then use the "Back" button in your browser to return to this page
|
|
Recessed Fluorescent Luminaires
with or without battery back-up for
mounting in 609mm (24 in.) inverted T-Bar ceiling system
Application: Interior recessed parallel mounting in linear interlocking ceiling systems (Jamestown Marine C70)
Approvals: CSA C22.2 No. 250.0-00, UL 1598 & 1598A
Protection Class: IP23
Housing: Aluzinc sheet steel
Finish: Epoxy powder coat, white RAL 9016
Diffuser: Aluminum extruded frame with a selection of different acrylic diffuser materials; FR1: double prismatic; FR2: Acrylic Opal Panel; FR3: White acrylic grid; FR4:
Matallised acrylic grid in silver
Electrical: Flexible wiring, heat resistant to 105°C, through wiring up to 15A
Cable Entry: one knock-out at each end and back
Lamp Base: G13
Light Sources
(not included):
Fluorescent Tube, T8, 17/32w tubes for electronic ballasts;
T12, 20/40w tubes for magnetic ballasts
Battery backup: Optional 90-minute battery backup. 500-600 lumens for 90 minutes at 20°C. Other configurations available on request.
Charge time from full discharge: 24 hours
Supply voltage: 120v 60hz h.p.f.c. for magnetic ballasts, 120-277vac 50/60hz for electronic ballasts
Mounting: mounting kit provided for recessed parallel mounting in linear, Jamestown Marine C70 interlocking ceiling. Standard side mounting kit provided
Versions available:
2, 3 or 4 x 17/20w or 2, 3 or 4 x 32/40w, with or without battery backup with either magnetic or electronic ballasts.
Dimming: Optional dimming ballast available
upon request.
Part Number: MT-DLT-2xxx (DLT RT (M) 609 FR) |
Click on any image to see a larger version of the
picture
and then use the "Back" button in your browser to return to this page
|
|
Recessed Fluorescent Luminaires
with or without battery back-up for
mounting in solid ceiling
Application: Interior recessed, mounting in solid ceiling, designed for use in galleys, pantries, cabins, corridors etc.
Approvals: CSA C22.2 No. 250.0-00, UL 1598 & 1598A
Protection Class: IP44
Housing: Aluzinc sheet steel
Finish: Epoxy powder coat, white RAL 9016
Diffuser: Clear prismatic acrylic diffuser.
Electrical: Flexible wiring, heat resistant to 105°C, through wiring up to 15A
Cable Entry: two knock-outs at each end and back
Lamp Base: G13
Light Sources
(not included):
Fluorescent Tube, T8, 17/32w tubes for electronic ballasts;
T12, 20/40w tubes for magnetic ballasts
Battery backup: Optional 90-minute battery backup. 500-600 lumens for 90 minutes at 20°C. Other configurations available on request.
Charge time from full discharge: 24 hours
Supply voltage: 120v 60hz h.p.f.c. for magnetic ballasts, 120-277vac 50/60hz for electronic ballasts
Mounting: Recessed in solid ceiling, swing out brackets for easy adjustment
Versions available: 2 x 17/20w or 2 x 32/40w, with or without battery backup with either
magnetic or electronic ballasts.
Dimming: Optional dimming ballast available upon request.
Part Number: MT-GIM-xxxx
(GIM) |
Click on any image to see a larger version of the
picture
and then use the "Back" button in your browser to return to this page
|
|
Recessed Fluorescent Luminaires
with or without battery back-up for
mounting in solid ceiling
Application: Interior recessed, mounting in 300 mm linear tiled ceiling, designed for use in galleys, pantries, cabins, corridors etc.
Approvals: CSA C22.2 No. 250.0-00, UL 1598 & 1598A
Protection Class: IP44
Housing: Aluzinc sheet steel
Finish: Epoxy powder coat, white RAL 9016
Diffuser: Clear prismatic acrylic diffuser.
Electrical: Flexible wiring, heat resistant to 105°C, through wiring up to 15A
Cable Entry: two knock-outs at each end and back
Lamp Base: G13
Light Sources
(not included):
Fluorescent Tube, T8, 17/32w tubes for electronic ballasts;
T12, 20/40w tubes for magnetic ballasts
Battery backup: Optional 90-minute battery backup. 500-600 lumens for 90 minutes at 20°C. Other configurations available on request.
Charge time from full discharge: 24 hours
Supply voltage: 120v 60hz h.p.f.c. for magnetic ballasts, 120-277vac 50/60hz for electronic ballasts
Mounting: Recessed in 300 mm linear tiled ceiling, swing out brackets for easy adjustment
Versions available: 2 x 17/20w or 2 x 32/40w, with or without battery backup
with either magnetic or electronic ballasts.
Dimming: Optional dimming ballast available upon request.
Part Number: MT-GIM-xxxx
(GIM M300) |
Click on any image to see a larger version of the
picture
and then use the "Back" button in your browser to return to this page
|
