Application: Fluorescent lighting for Food Preparation areas where strict hygienic rules will apply. Soft contours allow for easy and rapid cleaning.
Approvals: UL 1598 & 1598A, US Dept. of Public Health
Protection Class:  IP66
Housing:  Stainless steel back plate, aluzinc sheet steel geartray painted epoxy powder coat, white RAL 9016
Diffuser: Clear polycarbonate
Electrical: Flexible wiring, heat resistant to 105°C
Cable Entry:  two  inlets for max. cable diameter of 11mm
Lamp Base: G13
Light Sources (not included): Fluorescent Tube, T8, 17/32w tubes for electronic ballasts
Supply voltage: 120v 60hz h.p.f.c.,  120-277vac  50/60hz for electronic ballasts, others on request
Mounting:  Direct mounting to continuously flat ceiling with 6/10 mounting holes Ø 5 mm
Versions available: 2 x 17w or 2 x 32w,
Part Number: MT-08010xxxxx   (1961)

Click on any image to see a larger version of the picture and then use the "Back" button in your browser to return to this page

Interior Fluorescent Luminaires
can be mounted semi-recessed or surface

Application: Interior accommodation or public areas
Approvals: UL 1598 & 1598A
Protection Class:  IP20
Housing:  Aluzinc sheet steel
Finish: Epoxy powder coat, white RAL 9016
Diffuser: Clear acrylic diffuser with "Ice Crystal" pattern or Opal Polycarbonate diffuser
Electrical: Flexible wiring, heat resistant to 105°C, through wiring up to 15A
Cable Entry:  two 1/2 inch knock out in each end
Lamp Base: G13
Light Sources (not included): Fluorescent Tube, T8, 17/32w tubes for electronic ballasts; T12, 20/40w tubes for magnetic ballasts
Supply voltage: 120v 60hz h.p.f.c. for magnetic ballasts, 120-277vac 50/60hz for electronic ballasts
Mounting:  Direct to flat ceiling or semi-recessed
Versions available: 2 x 17/20w or 2 x 32/40w, with either magnetic or electronic ballasts.
Part Number: MT-1600 1xxx 

   Click on any image to see a larger version of the picture and then use the "Back" button in your browser to return to this page

Cornice Fluorescent Luminaires

Application: Cabins, Corridors, Restrooms, stairwells
Approvals: CSA C22.2 No. 250.0-00, UL 1598 & 1598A
Protection Class:  IP20
Housing:  Aluzinc sheet steel
Finish: Epoxy powder coat, white RAL 9016
Diffuser: 3mm Opal acrylic diffuser attached with endcaps.
Electrical: Flexible wiring, heat resistant to 105°C
Cable Entry:  one 1/2 inch on side and back
Lamp Base: G13
Light Sources (not included): Fluorescent Tube, T8, 17/32w tubes for electronic ballasts; T12, 20/40w tubes for magnetic ballasts
Battery backup: Optional 90-minute battery backup. 500-600 lumens for 90 minutes at 20°C. Other configurations available on request.
Charge time from full discharge: 24 hours
Supply voltage: 120v 60hz h.p.f.c. for magnetic ballasts, 120-2777vac 50/60hz for electronic ballasts
Mounting:  Cornice mounting direct to bulkhead or deckhead
Versions available: 1 or 2 x 17/20w or 1 or 2 x 32/40w, with or without battery backup with either magnetic or electronic ballasts.
Part Number: MT-GKASA-1xxx 

Click on any image to see a larger version of the picture and then use the "Back" button in your browser to return to this page