NX2 Transducers & Accessories

NX2 Compass Transducer 35°                        Part Number 85024

Low weight fluid damped compass in compact size allows mounting in cramped areas. It can be flush (surface) mounted. The compass is auto-deviated from the Multi Control instrument.
Dimensions: 108 x 49mm (4.2 x 1.9")
Weight: 144g (5.1 oz)
Cable: 8m (26.2ft)
Power supply: 12V DC (10-16V)
Current consumption: 35mA at 12V
Accuracy: +/- 2.5°
Sensitivity: +/- 0.1°
Pitch and roll: 35°

NX2 Compass Transducer 45°                        Part Number 85025

NX2 Depth Transducer                                Part Number 85023

The NX2 Depth Transducer measures the water depth. It is a rugged retractable through hull transducer in moulded glass filled polyester. Instrument settings allow you to measure from water surface or the keel.
Dimensions: 92 x 43mm (3.6 x 1.7")
Weight: 380g (13.4oz)
Cable: 8m (9.8+26.2ft)
Power supply: 12V DC (10-16V)
Current consumption: 20mA at 12V
Range: 0.8-150m (2.6-492ft) from transducer
Frequency: 185kHz

Sensitive and responsive the NX2 Wind Transducer provides accurate wind speed and wind angle data to the NEXUS Network. Easy, snap-in attachment for mast mounting included.
Dimensions: 450 x 300mm (17.7 x 11.8")
Weight: 295g (10.4oz)
Cable: 25m (82ft)
Power supply: 12V DC (10-16V)
Current consumption: 20mA at 12V
Accuracy: Angle +/- 0.5%
Speed: +/- 0.5 m/s (kts, bf)

(Mast Rotation Compensation) Kit is for compensation of the mast on sailing vessels with rotating masts. The MRC is connected to the Wind Data instrument only and then the mast compensation information is sent to the Nexus Network.

NX2 Masthead Extension                            Part Number 85029

Carbon Fibre Extension for Standard Nexus Mast Head unit: this unit will provide better accuracy on sailing vessels with large amounts of disturbed air at Mast Head level. Light weight construction, fits standard Mast Top Unit and can be added to all NX2/Nexus Mast Top units.

A Long Stem thru hull fitting in Bronze providing Speed, Temp and Depth to the server in one thru hull fitting.

• The Log Transducer measures boat speed, distance and water temperature. The unique paddle wheel construction provides very accurate data at very low speeds. The retractable through hull transducer is designed for easy cleaning of paddle wheel. Dummy plug included.
  Dimensions: 92 x 43mm (3.6 x 1.7")
  Speed range: 0-30kts (km, mph)
  Weight: 320g (11.3oz)
  Temp. measure range: 23° to + 104°F
  Cable: 8m (26.2ft)
  Power supply: 12V DC (10-16V)
  Accuracy (speed): +/- 1%
  Current consumption: 20mA at 12V

• The compact and water resistant GPS antenna/receiver, is suitable for a wide range of applications. It can be mounted directly on the deck, on a pulpit or on a mast using standard mounts. It can be connected directly to NMEA compatible navigation equipment, such as GPS Navigator
  Dimensions: 108 x 49mm (4.2 x 1.9")
  Weight: 200g (7oz)
  Transducer cable: 10m (32.8ft)
  Power supply: 12V DC (10-16V)
  Current consumption: 100mA
  Communication out: NMEA 0183
  Receiver: 12 channel parallel
  Antenna: Ceramic patch
  Position accuracy: Less than 25m 95% of the time

Fits all NX2 instruments in 113 x 113 mm (4.3" X 4.3" inches) size, for surface mounting:

88246 One instrument bracket
88247 Two Instrument brackets
88248 Three Instrument brackets

Instrument brackets for Sailing vessels and mast mounting. Two and Three available in Carbon Fibre.

Use this connection box for smoother installation of the Nexus Network. It is great for coordinating the use of numerous connections at a single access point.