Quality Marine Products Distributor |
 |
Presents |
 |
Contact Jastram Line Card Product Index External Links
ComNav Autopilot Accessories
|
|
The ComNav Rudder Angle Indicator is an optional component which can be added to any autopilot system where a stand alone system is not required.
Multiple meters can be connected to the autopilot. The autopilot has to be on in any mode for them to work. Note:- The Jastram RAI-300 and the Comnav 94249 RAI are not electrically interchangeable but are visually identical except for the Logo on the face.
|
|
The ComNav Stand Alone Rudder Angle Indicator System is a complete single station RAI system. This is typically used on vessels that do not have a
ComNav Autopilot or in cases where a separate RAI system is required (such as Hydraulic Full Follow-up steering systems). It will support multiple meters.
|
|
|
|
The ComNav Remote Expander is used to increase the number of remotes that can be connected to ComNav 1001, 1101, 1201 and 2001 Autopilots. The 1001, 1101 and 1201 Autopilots will support one Expander where as the 2001 will support two Expanders. Up to 4 remotes can be plugged into each Remote Expander.
|
|
|
The ComNav NFU Jog Switch is a permanently mounted, watertight, electrical switch specifically designed for marine service. The spring-centred lever
is moved to Port or Starboard as desired to provide non follow-up (time dependent) electrical control of the vessel steering system. The Jog Switch can work in conjunction with any
autopilot system or can be installed and used as a stand alone system. Note:- The Jastram Jog Lever and the Comnav Jog Lever are electrically and physically interchangeable and are identical except for the Logo on the face.
|
|
|
|
