Jastram Technologies Ltd. quality marine products distributor Presents bst Brandshutztechnik Cable Transits & Marine Cable Transits

Half insert modules

Insert module p/n CO-SBS-15/3 to CO-SBS-15/9 (half block)

Insert module p/n CO-SBS-20/3 to CO-SBS-20/16 (half block)

Insert module p/n CO-SBS-30/12 to CO-SBS-30/24 (half block)

Insert module p/n CO-40/22 to CO-40/34 (half block)

Filler blocks

Filler Blocks

P/N	P/N
CO-5/0	CO-10/0
CO-15/0	CO-20/0
CO-30/0	CO-40/0
CO-60/0	CO-90/0
CO-120/0		blank

Supermodules with Clamps

Supermodules with clamps, available in sizes
40/ 22, 23, 24, 25, 26, 27, 28, 29, 30 mm Ø
50/30, 32, 34, 36, 38, 40 mm Ø
60/42, 44, 46, 48, 50 mm Ø
90/52, 54, 56, 58, 60, 62, 64, 66, 68, 70, 72, 74, 76, 78, 80 mm Ø

SBS supermodules type 40 and 50 are supplied with 8 clamps, type 60 and 90 with 12 clamps.
When ordering: one supermodule set for one cable!

Installation

cover inner sides of frame...

...and all rubber parts liberally with bst-lubricant

Install insert- or multi insert modules according to filling plan.

Anchor plates put between the module rows facilitate the assembly and increase sealing effect.

bst multi insert modules reduce assembly time, single half-modules are simply torn-off.

Remaining space to be filled with filler bocks or multi filler blocks. Insert last anchor plate in due time!

Most important : lubricate all inner surfaces of wedge K-120 sufficiently! Put the side wedges around the central wedge...

...and press the K-120 above the last anchor plate into the frame, but apply pressure only to the head of the bolt!

Tighten the bolt with socket I.D. 17 mm and ratchet or electric drill.

If at a later date more cables need to be added to the frame, the frame can be opened, the new cable added, and then closed again at any time.

Unscrew central bolt and remove it!

Insert puller screw (attached to puller with a chain) into the tapped hole of central wedge.

Hook puller to the screw and pull out the wedge by wrench I.D. 22mm.

BST - Filler Blocks, Multi-Filler Blocks, Insert Blocks, & Multi-Insert Blocks
Design For bst frame SBS and SBSO. Multi insert modules, multi filler blocks or supermodules made from halogen-free and highly fire-resistant elastomeric rubber (HFE). Module length 90mm.
	Multi insert modules - developed by bst and well-proven - in sizes 15, 20, 30 and 40mm reduce the assembly time considerably. Cable diameters from 3 to 34mm, width of module row 120mm, suitable for all SBS-frames. Half-modules available also in singles. 2 half-modules required for 1 cable!
	bst-Supermodules are available in sizes 40, 50, 60 and 90mm for cable diameters from 22 to 80mm. For one cable one module is required.
	Filler blocks and multi filler blocks in sizes 5, 10, 20, 30 are to be used for filling the reserve space for later cable installations.

Quality Marine Products Distributor
Presents

Quality Marine Products Distributor