Cable Transits - Register 1
Accessories

Accessories
bst Power Squeezer  Compression tool for an easy pre-packing of bst insert modules and filler blocks in modular cable transits.         The bst Power Squeezer facilitates the assembly of insert modules and filler blocks from the bst standard program or of Quick-Fix Tolerance Cable Modules (TCM). A simple pre-packing on car jack principle before the last or the last two module rows are put in facilitates the further assembly of modules and the wedge compression unit. Suitable for bst frames with installation depth of 60mm and 90mm.                Packing unit: Power Squeezer + GFK-compression plate + wrench ID 17mm + socket for  use with electric or pneumatic powered drill.
bst Fix Anchor Plate To be used togehter with the bst Power Squeezer. It holds the prepressed modules in place and facilitates the assembly of the last module row as well as the insertion of the wedge K-120. The Fix Anchor Plate remains in the frame after asembly and serves the same purpose as the standard anchor plate.
bst Puller  P/N CO-PU-120 For removing wedge kit CO-K-120 after it has been inserted in a cable transit.  The bst Puller is an important tool for an easy and careful disassembly of the CO-K-120.
bst Mould bst Mould made from Austyrol (Styrofoam) used in concrete form to hold space for transit while pouring concrete saving the expense of additional framing. Standard length 30cm, longer lengths upon request.
bst Lubricant  P/N CO-LU-30  &   CO-LU-500 Supplied in containers of 30g and 500g. Facilitates the insertion of modules into the frame, increases the sealing effect, acts as lubricant if modules have to be changed during later cable modifications.

Jastram Logo and page style © Jastram Technologies Ltd.
bst Logo, graphics and text © bst Brandshutztechnik

last updated 12th May 2005