Quality Marine
Products Distributor

Presents

Aqua Signal
Marine Multi-purpose Lights
Click on any image to see a larger version of the picture
and then use the "Back" button in your browser to return to this page

Watertight Luminaire, Surface Mount

Aqua Signal 1888
Application: Workshops, engine rooms, stores, holds, passageways, galleys
Design: According to the rules of maritime classification societies, additional VDE and IEC / EN
Protection Class:  IP55 or IP67
Housing:  Zinc coated steel sheet, deep drawn seamless
Gear tray: Zinc Coated Steel Sheet powder coated white RAL 9016 and enameled up to 70-80µm thickness
Diffuser: Clear polycarbonate, others on request, all with quick release turn buttons
Electrical: Flexible wiring, heat resistant to 105°C, clip in system for gear tray with plug in connector to housing for easy removal
Mounting:  2 mounting holes each 10.0mm in diameter
Supply voltage: 230v 50Hz, or 220v 60Hz with high power factor correction or low power factor, 24VDC, others on request
Versions available:  1 x 18/20w; 2 x 18/20w; 1 x 36/40w, & 2 x 36/40w
Lamp base:  G 13 for 2 pin T26 or T38 Fluorescent tubes
(tubes are not included with the fixture)

 Aqua Signal 1888 fixture dimensionsAqua Signal 1888 fixture parts drawing
      1 x 18/20w               2 x 18/20w
 1 x 18/20w light output chart2x 18/20w light output graph
         1 x 36/40w               2 x 36/40w
 Aqua Signal 1 x 36/40w light output graphAqua Signal 2 x 36/40w light output graph

Watertight Luminaire, Surface Mount

Aqua Signal 1044
Application: Workshops, engine rooms, stores, holds, passageways,
Design: According to the rules of maritime classification societies, additional VDE and IEC / EN
Protection Class:  IP55 or IP67
Housing:  Zinc coated steel sheet, deep drawn seamless
Gear tray: Zinc Coated Steel Sheet powder coated white RAL 9016 and enameled up to 70-80µm thickness
Diffuser: Clear polycarbonate, others on request,
Electrical: Flexible wiring, heat resistant to 105°C, removable gear tray with plug in connector to housing
Mounting:  2 mounting holes each 10.0mm in diameter
Supply voltage: 230v 50Hz, or 220v 60Hz with high power factor correction or low power factor, 24VDC, others on request
Versions available:  1 x 18/20w; 2 x 18/20w; 1 x 36/40w, & 2 x 36/40w
Lamp base:  G 13 for 2 pin T26 or T38 Fluorescent tubes
(tubes are not included with the fixture)

 Aqua Signal 1044 light fixture 2 x 20wAqua Signal 1044 - 2 x 20w dimensionsAqua Signal 1044 - 2 x 40w dimensions
      1 x 18/20w               2 x 18/20w
 Aqua Signal 1044 - 1 x 20w light output graphAqua Signal 1044 - 2 x 20w light output graph
         1 x 36/40w               2 x 36/40w
 Aqua Signal 1044 - 1 x 40w light output graphAqua Signal 1044 - 2 x 40w light output graphAqua Signal 1044 - parts drawing

 

Hold Luminaire, heavy duty,
Surface Mount

Aqua Signal 1075
Application: Workshops, engine rooms, stores, holds,
Design: According to the rules of maritime classification societies, additional VDE and IEC / EN
Protection Class:  IP67
Housing:  Zinc coated steel sheet, deep drawn seamless
Gear tray: Zinc Coated Steel Sheet powder coated white RAL 9016 and enameled up to 70-80µm thickness
Diffuser: Clear polycarbonate, reinforced
Electrical: Flexible wiring, heat resistant to 105°C, through wiring up to 16 amps, removable gear tray with plug in connector to housing
Mounting:  2 welded brackets with 2 mounting holes each 10.5mm in diameter
Supply voltage: 230v 50Hz, or 220v 60Hz with high power factor correction , others on request
Versions available:  2 x 18w; 1 x 36w, & 2 x 36w
Lamp base:  G 13 for 2 pin T26  Fluorescent tubes
model for T38 tubes on request
(tubes are not included with the fixture)

Aqua Signal 1075 - 2 x 20w fixtureAqua Signal 1075 - 2 x 20w fixture dimensionsAqua Signal 1075 - 2 x 20w fixture dimensions
       2 x 18/20w
 Aqua Signal 1075 - 2 x 20w light output graphAqua Signal 1075 - parts drawing
         1 x 36/40w               2 x 36/40w
 Aqua Signal 1075 - 1 x 40w light output graphAqua Signal 1075 - 2 x 40w light output graph
 

Ceiling Luminaire, Surface Mount

Aqua Signal 1961
Application: Kitchens, galleys, pantries, provision rooms
Design: According to the rules of maritime classification societies, additional VDE and IEC / EN
Protection Class:  IP67
Back Plate:  Stainless steel
Gear tray: Zinc Coated Steel Sheet powder coated white RAL 9016 and enameled up to 70-80µm thickness. stainless steel on request
Diffuser: Clear polycarbonate
Electrical: Flexible wiring, heat resistant to 105°C,
Mounting:  6 / 10 mounting holes each 5mm in diameter
Supply voltage: 230v 50Hz, or 220v 60Hz with high power factor correction , others on request
Versions available:  2 x 18/20w;  & 2 x 36/40w
Lamp base:  G 13 for 2 pin T26 T38 Fluorescent tubes
(tubes are not included with the fixture)

Aqua Signal 1961 - 2 x 20w fixtureAqua Signal 1961 - fixture dimensions
         2 x 18/20w               2 x 36/40w
 Aqua Signal 1961 - 2 x 20w fixtureAqua Signal 1961 - 2 x 40w fixture
 Aqua Signal 1961 - parts drawing
 

Fluorescent Downlight, Recessed

Aqua Signal 0243
Application: Kitchens, pantries, passageways
Design: According to the rules of maritime classification societies, additional VDE and IEC / EN
Protection Class:  IP44 or IP55
Back Plate:  Zinc coated steel sheet, deep drawn
Reflector: Highly polished anodized aluminium
Diffuser: Clear polycarbonate
Electrical: Flexible wiring, heat resistant to 105°C,
Mounting:  4 mounting holes each 4mm in diameter for ceilings up to 30mm thick
Supply voltage: 230v 50Hz, or 220v 60Hz low power factor, others on request
Versions available:  2 x 5/7w
Lamp base:  G 23 tubular compact fluorescent tubes 5 or 7w
(tubes are not included with the fixture)

Aqua Signal 0243 - downlight fixtureAqua Signal 0243 - fixture dimensions
 Aqua Signal 0243 - downlight output graphAqua Signal 0243 - downlight parts drawing

Jastram  Logo and page style © Jastram  Technologies Ltd.
Aqua Signal Logo, graphics and text © Aqua Signal Gmbh
last updated 12th May 2005