Ceiling
Luminaire,
Recessed & Surface Mount
Aqua Signal 0666 surface mount / 0667
recessed
Application: Accommodation areas, public areas
Design: According to the rules of maritime classification societies,
additional VDE and IEC / EN
Protection Class: IP30
Housing: Zinc coated steel sheet, deep drawn seamless
powder coated white RAL 9016 and
enameled up to 70-80µm thickness
Diffuser: Opal polycarbonate,
Electrical: Flexible wiring, heat resistant to 105°C,
Mounting: 4 / 6 mounting holes each 5mm in
diameter
Supply voltage: 230v 50Hz, or 220v 60Hz with high power factor
correction or low power factor, others on request
Versions available: 2 x 18/20w; & 2 x 36/40w
Lamp base: G 13 for 2 pin T26 or T38 Fluorescent tubes
(tubes are not included with the fixture) |
0666
  
2 x 18/20w
2 x 36/40w
  
0667
  
2 x 18/20w
2 x 36/40w
   |
|
Ceiling Luminaire,
Recessed & Surface Mount
Aqua Signal 1600900
Application: Accommodation areas, lounges
Design: According to the rules of maritime classification societies,
additional VDE and IEC / EN
Protection Class: IP30
Housing: Zinc coated steel sheet, deep drawn seamless
powder coated white RAL 9016 and
enameled up to 70-80µm thickness
Diffuser: Opal polycarbonate
Electrical: Flexible wiring, heat resistant to 105°C,
Mounting: 4 mounting holes each 5mm in
diameter
Supply voltage: 230v 50Hz, or 220v 60Hz with high power factor
correction or low power factor, others on request
Versions available: 2 x 9w
Lamp base: G 23 Tubular compact fluorescent tube 9w
(tubes are not included with the fixture) |
 
  |
|
Ceiling Luminaire,
Surface Mount
Aqua Signal 1113
Application: Accommodation areas, passageways
Design: According to the rules of maritime classification societies,
additional VDE and IEC / EN
Protection Class: IP67
Housing: Zinc coated steel sheet, deep drawn seamless
powder coated white RAL 9016 and
enameled up to 70-80µm thickness
Diffuser: Opal polycarbonate
Electrical: Flexible wiring, heat resistant to 105°C,
Mounting: 24 / 6 mounting holes each 5mm in
diameter
Supply voltage: 230v 50Hz, or 220v 60Hz with high power factor
correction , others on request
Versions available: 2 x 18/20w; & 2 x 36/40w
Lamp base: G 13 for 2 pin T26 or T38 Fluorescent tubes
(tubes are not included with the fixture)
|
 
2 x 18/20w
2 x 36/40w
 
|
|
Ceiling Luminaire,
Surface Mount
Aqua Signal 5070
Application: Accommodation areas, passageways, public areas
Design: According to the rules of maritime classification societies,
additional VDE and IEC / EN
Protection Class: IP20
Housing: Zinc coated steel sheet, deep drawn seamless
powder coated white RAL 9016 and
enameled up to 70-80µm thickness
Diffuser: Opal Plastic Panel, Batwing louvre, + others
Electrical: Flexible wiring, heat resistant to 105°C,
Mounting: mounting brackets and side rails included
Supply voltage: 230v 50Hz, or 220v 60Hz with high power factor
correction , others on request
Versions available: 2 x 18/20w; & 2 x 36/40w
Lamp base: G 13 for 2 pin T26 T38 Fluorescent tubes
(tubes are not included with the fixture)
|
  
  
2 x 18/20w
2 x 36/40w
   |
|
Ceiling Luminaire,
Recessed Mount
Aqua Signal 5070
Application: Wheelhouse, Accommodation areas, passageways, public
areas
Design: According to the rules of maritime classification societies,
additional VDE and IEC / EN
Protection Class: IP20
Housing: Zinc coated steel sheet, deep drawn seamless
powder coated white RAL 9016 and
enameled up to 70-80µm thickness
Louver: white plastic + other variations
Electrical: Flexible wiring, heat resistant to 105°C,
Mounting: 4 / 8 mounting holes 7mm in diameter
Supply voltage: 230v 50Hz, or 220v 60Hz with high power factor
correction or low power factor, others on request
Versions available: 1 x 18/20w, 2 x 18/20w; 1 x 36/40w, & 2 x 36/40w
Lamp base: G 13 for 2 pin T26 T38 Fluorescent tubes
(tubes are not included with the fixture)
|
  
 
2 x 18/20w
2 x 36/40w
 |
|
Cornice Luminaire,
Surface Mount
Aqua Signal 1133
Application: Accommodation areas, passageways,
Design: According to the rules of maritime classification societies,
additional VDE and IEC / EN
Protection Class: IP30
Housing: Zinc coated steel sheet, deep drawn seamless
powder coated white RAL 9016 and
enameled up to 70-80µm thickness
Diffuser: Opal polycarbonate, others on request
Electrical: Flexible wiring, heat resistant to 105°C,
Mounting: 4 mounting holes 5mm in diameter
Supply voltage: 230v 50Hz, or 220v 60Hz with high power factor
correction or low power factor, others on request
Versions available: 1 x 18/20w, 2 x 18/20w; 1 x 36/40w, & 2 x 36/40w
Lamp base: G 13 for 2 pin T26 T38 Fluorescent tubes
(tubes are not included with the fixture)
|
  
1 X 18/20W
2 X 18/30W
 
1 X 36/40W
2 X 36/40W
  |
|
Ceiling Luminaire,
Recessed Mount
Aqua Signal 1227
Application: Wheel house, accommodation areas, public areas,
Design: According to the rules of maritime classification societies,
additional VDE and IEC / EN
Protection Class: IP20
Housing: Zinc coated steel sheet, deep drawn seamless
powder coated white RAL 9016 and
enameled up to 70-80µm thickness
Louver: White plastic, others on request
Electrical: Flexible wiring, heat resistant to 105°C,
Mounting: 4 / 8 mounting holes 7mm in diameter
Supply voltage: 230v 50Hz, or 220v 60Hz with high power factor
correction or low power factor, others on request, electronic ballasts on
request
Versions available: 1 x 18/20w, 2 x 18/20w; 1 x 36/40w, & 2 x 36/40w
Lamp base: G 13 for 2 pin T26 T38 Fluorescent tubes
(tubes are not included with the fixture)
Note: infinitely modifiable such as
one half red one half white for use in the wheelhouse.
|
  
aluminium white
aluminium black aluminium silver
  
1 X 18/20W
2 X 18/30W
 
1 X 36/40W
2 X 36/40W
   |
|
Compact Luminaire,
Recessed Mount
Aqua Signal 1282 compact fluorescent
1402 Incandescent
Application: Accommodation areas, shower rooms, washrooms, toilets
Design: According to the rules of maritime classification societies,
additional VDE and IEC / EN
Protection Class: IP44
Housing: Zinc coated steel sheet
Finish: powder coated white RAL 9016 and
enameled up to 70-80µm thickness
Diffuser: Opal polycarbonate
Electrical: Flexible wiring, heat resistant to 105°C,
Lamp Base: 1282: G23; 1402: E27 or B22
Cable Entry: 2 inlets for max. cable diameter of 11mm
Mounting: 4 mounting holes, 4mm diameter
Supply voltage: 1282; 230v 50Hz, or 220v 60Hz low power factor, other voltages, electronic ballasts on
request, 1402: 250v max.
Versions available: 1282: 2 x 9w, 1402: 1 x E27 ro B22 socket
Light Source: 1282: G 23 compact fluorescent 2 x 9w; 1402: Incandescent lamp 60w max.
(lamps/tubes are not included with the fixture)
|
Fluorescent Incandescent
|
|
Batten Luminaires,
Surface Mount
Aqua Signal 0815 & 1814
Application: Accommodation areas
Design: According to the rules of maritime classification societies,
additional VDE and IEC / EN
Protection Class: IP20
Housing: Zinc coated steel sheet
Finish: powder coated white RAL 9016 and
enameled up to 70-80µm thickness
Electrical: Flexible wiring, heat resistant to 105°C,
Lamp Base: 0815: G13; 1814: G23
Cable Entry: 0815: Opening on rear side, dia. 17 x 39mm, 1814: opening
on end for max. cable 11mm diameter
Mounting: 2 mounting holes, 0815 10mm in diameter, 1814 5mm diameter
Supply voltage: 0815; 230v 50Hz, or 220v 60Hz with high power factor
correction or low power factor, others on request, electronic ballasts on
request, 1814: 230v 50Hz, or 220v 60Hz low power factor only
Versions available: 0815: 1 x 18w, 1 x 30w, 1 x 36w, 1814: 1 x 5/7/9/11w compact fluorescent
Light Source: 0815: G 13 for 2 pin T26 18/30/36w Fluorescent tubes; 1814: G23 compact fluorescent 5/7/9/11w
(tubes are not included with the fixture)
|
0815
1 x 18w 1 x 30W
1 x 36W
1814
1 x 11w |
|
Emergency Luminaires,
Surface Mount
Aqua Signal 1303, 1304, & 1306
Application: Accommodation areas, public areas, passageways
Design: According to the rules of maritime classification societies,
additional VDE and IEC / EN
Protection Class: IP30
Housing: 1303 & 1304: stainless steel; 1306: Zinc coated steel sheet
Finish: 1306: powder coated white RAL 9016 and
enameled up to 70-80µm thickness
Diffuser: Opal polycarbonate
Electrical: Flexible wiring, heat resistant to 180°C,
Lamp Base: choice of E14/B15/E27/B22
Cable Entry: knock out opening 2 inlets
Mounting: 2/3 mounting holes, 4.5/5mm diameter
Supply voltage: 250v max.
Versions available: 1303 & 1304: with E14 or B15 sockets; 1306: with E27 or B22 sockets
Light Source: 1303 & 1304: Incandescent tubular lamps 15w max.; 1306: Incandescent Tubular or standard 15w max.
(bulbs are not included with the fixture)
|
 |
0815
1814
