Quality Marine Products Distributor

Presents

Marine Whistle Systems Class IV Vessels

Whistle systems for boats under 20 M. / 65 ft
[IMO: 120 dB 1/3rd-octave band level at 1 meter]

• Cast in corrosion resistant, light weight marine aluminum with stainless steel fasteners for years of trouble free service.
• IMO/COLREGS certified for vessels up to 75 meters.
• Famous self draining design - featuring a horizontal bell with horizontal diaphragm head so that water will drain away from diaphragm seat.
• Energy efficient over a wide range of pressure (15 to 120 psi).  
• Produces a loud powerful signal using as little as 15 psi in order to command immediate attention.
• Fully Enclosed models available for cold weather applications.
• Self Contained models available for when an air supply is not available or desired

• Self-contained air horn for applications where no air supply is available or desired
• Available in several model variations featuring our KMJ model air horns - consisting of a motor directly connected to a rotary compressor
• When equipped with our thermostatically controlled heater these units are an excellent choice for cold weather use
• Our quality self-contained models meet or exceed the current IMO/COLREGS

Models  KMJ-3, KMJ-4, KMJ-5
               KMJ-23, KMJ-34, KMJ-45
               KMJ-234, KMJ-345

These whistle only units are available in several frequencies, in 1, 2, or 3 horn configurations and are designed to withstand the harshest marine environments

Models   KMJ-3-**, KMJ-4-**, KMJ-5-**
                KMJ-34-**, KMJ-45-**, KMJ-345-**
**  replace the two asterisks with
KVH = enclosed & heated solenoid valve 120/240 Vac or 24 Vdc
TVE = enclosed & heated triple valve manual and electric
EN   = enclosed & heated whistle diaphragm and solenoid valve     
add -L to include a navigation all round white light or whistle light to the assembly

Enclosed and heated air whistles are ideal for use in extreme weather conditions. These units are available in several frequencies and are designed to withstand the harshest marine environments.

These units have the following optional features:-

KMJ-TVE versions feature KMJ horn with enclosed heater and combination manual and 120/220VAC & 24VDC solenoid valve. (Triple Valve Enclosed)

KMJ-KVH versions feature KMJ horn with enclosed heated valve,
120/220VAC & 24VDC solenoid valve,

KVH-EN versions feature a fully enclosed and heated KMJ horn diaphragm with combination solenoid and manual valve. Designed especially for extreme cold weather conditions.

• SOLID BRONZE & BRASS
• PAINTED HEAD
• FINISHED BELL

MODEL CS-1 & CS-2

Manufactured from cast aluminum, the CS series (not shown) are a smaller yet equally reliable single tone horn.

Frequencies of 311 Hz, 370 Hz and 622 Hz

MODEL PF 1625

• for navigation signals
• for distress signal
• meets international regulations for boats
  under 20 meters (65 ft)